The following application notes are available for viewing and downloading as PDF documents:

Chemical:

Fracture Failure Analysis of Steel Wire
Low Vacuum SEM Analysis of Biological Sample – Goldenrod Flower
Melting Temperature and Latent Heat of Fusion of Indium
Refractive Index Measurements to Compare Chemical Purity
SEM EDS Analysis of Bicentennial Penny Patina
SEM EDS Analysis on Scratch Failure of PTFE Coated Stainless Steel Guide Wire
Simultaneous Thermal Analysis of the Decomposition of Calcium Oxalate
Specific Heat Capacity of Refractory Material
Thermogravimetric Analysis of Calcium Oxalate
Using DSC to Measure the Degree of Crystallinity in Polyethylene Waste Bags

Contact Angle:

Advancing and Receding Angles of Biomedical Catheters
Advancing, Receding and Roll-off Angle Measurements through Sliding Angle Method
Are you using Too Much Detergent to Wash your Dishes
Contact Angle Measurement for Molten Polymer at High Temperature
Micro Contact Angle Measurements on Single Particles, Filaments and Patterned Surfaces
Surface and Interfacial Tension of Liquids
Surface Free Energy Analysis of Gelatin Samples

Liquids:

Density and Surface Tension of Ink
Dynamic Surface Tension of an Aqueous Detergent Solution
Interfacial Tension between Soap Water and Vegetable Oil
Refractive Index Measurements to Compare Chemical Purity
Viscosity of Motor Oil as a Function of Temperature

Mechanical:

Coating Scratch Resistance and Interfacial Adhesion Evaluation through Nanoscratch
In-situ and Small-Volume Fracture Toughness Measurement via Nanoindentation
Interfacial Adhesion Evaluation of Paint Coatings on a Pepsi Can through Scratch Testing
Nanoindentation for Hardness and Elastic Modulus Measurements at Nanoscale
Peel Strength at Varying Peel Angles, Speeds and Temperatures
Scratch Failure Characteristics of DLC Coating on M2 Steel
Vickers Hardness Testing of Metallic and Ceramic Materials

Metallurgy:

Coating Scratch Resistance and Interfacial Adhesion Evaluation through Nanoscratch
Fracture Failure Analysis of Steel Wire
In-situ and Small-Volume Fracture Toughness Measurement via Nanoindentation
Interfacial Adhesion Evaluation of Paint Coatings on a Pepsi Can through Scratch Testing
Nanoindentation for Hardness and Elastic Modulus Measurements at Nanoscale
Scratch Failure Characteristics of DLC Coating on M2 Steel
SEM EDS Analysis of Bicentennial Penny Patina
SEM EDS Analysis on Scratch Failure of PTFE Coated Stainless Steel Guide Wire
Vickers Hardness Testing of Metallic and Ceramic Materials

Microscopy:

Fracture Failure Analysis of Steel Wire
Low Vacuum SEM Analysis of Biological Sample – Goldenrod Flower
SEM EDS Analysis of Bicentennial Penny Patina
SEM EDS Analysis on Scratch Failure of PTFE Coated Stainless Steel Guide Wire

Optical Profilometry:

Contouring
Optical Inspection and Profiling of Defects on a Coated Wafer Surface
Surface Roughness Measurements through Optical Profilometry

Particle Size:

Concentration and Size of Particles in a Diamond Polishing Slurry
Nanoparticle Sizing through Dynamic Light Scattering
Particle Sizing of Coffee Grounds
Particle Sizing of Tap and Bottled Water

Pore Size:

Nano micro Pore Size and Pore Size Distribution Measurement

Thermal:

Coefficient of Thermal Expansion Measurement using TMA
Glass Transition Temperature Measurements Using Dynamic Mechanical Analysis
Melting Temperature and Latent Heat of Fusion of Indium
Simultaneous Thermal Analysis of the Decomposition of Calcium Oxalate
Specific Heat Capacity of Refractory Material
Thermogravimetric Analysis of Calcium Oxalate
Time-Temperature Superposition Using Dynamic Mechanical Analysis
Using DSC to Measure the Degree of Crystallinity in Polyethylene Waste Bags

Tribological:

Friction of Contact Lenses in Saline Solution
Light Load Reciprocating Wear of Computer Hard Disk Coatings
Wear Resistance Evaluation and Debris Generation Study through Nano Wear

Zeta Potential:

Zeta Potential of Silica Slurry as a Function of pH
Zeta Potentials of Solid Surfaces