Lab Services
Products
About Ebatco
Contact Us
Download
Executive Profile
Investors
Jobs
News

 
ULTRASONIC FLAW DETECTOR TUD300

 

Product info:
  • Measuring of pitch interval and analyze of echo times;
  • Two input methods: angles and K value.
  • Auto-calibration of probe and auto-gain.
  • Two measuring unit: mm/inch;
  • All built-in software can be up-graded on PC;
  • Lock/unlock the system parameters;
  • Equipped with gate setting and alarming function.
  • Two measurement displaying mode: type A and type B;
  • Freeze/defreeze waveform and detection parameters;
  • Communicating with PC by RS232 port for transferring the measuring data and system parameters;
  • 10 detecting channels are available with a separate detecting parameter and DAC curve in every channel.
  • Automatic generation of DAC curve, and 30 points can be recorded at most, adjustable offset curves and gain correction functions are available.
  • Provided with linear suppressing function, the highest suppressing is 80% of the screen height;
  • Memory up to 300 A scanned images, parameters and DAC, and 30000 thickness values.
  • Four Rectify Ways: positive half-wave, negative half-wave, full wave and radio frequency.
  • Three detecting modes: single-probe , dual-probe ones and transmission;

    Technical Specification
    Items Description
    Scanning Range 2.5 mm ~5000 mm
    Scanning Resolution 0.1mm (2.5mm ~100mm) 1mm (100 mm ~5000mm)
    Gain Range 0dB ~110 dB
    D-Delay -20μs~+3400μs
    P-Delay 0μs~99.99μs£¬resolution 0.01μs
    Sound speed 1000 m/s~9999m/s
    Bandwidth 0.2MHz~15MHz(Low0.2~1,Mid.0.5~4, High 3~15)
    Vertical linearity error ≤3%
    Horizontal linearity error ≤0.2%
    Dynamic range ≥32dB
    Rectification Positive half wave, negative wave, full wave, and RF
    Sensitivity leavings ≥60dB
    Test mode Pulse-echo, dual and through transmission
    Pulser Spike excitation pulser
    Damping 50ohms, 150ohms and 400ohms
    Reject Linear, 0-80% of full screen, variable in steps of 1%
    Unit Metric/inch
    Interface RS232
    Printer TP UP-NH-S line thermal printer
    AC requirements 85-264V AC/1.0A,47-63Hz
    Temperature -10°C~40°C
    Humidity 20%~90%RH
    Power supply Li battery 4x3.6V 4000mAh
    Charging time 4~5hours
    Weight 1.47kg
    Overall dimension 243mmx173 mmx70 mm




  • All Rights Reserved

    |Lab Services| |Products| |About Ebatco| |Contact Us| |Download| |Executive Profile| |Investors| |Jobs| |News|